The Cornucopia Cutwork Set is available in 3 sizes: for large, 5" x 7" (130 x 180 mm), and for small, 4" x 4" (100 x 100mm) and mega hoops.
Size: 99mm x 92mm (3.67" x 3.89")
Size: 99mm x 99mm (3.89" x 3.89")
Size: 129mm x 129mm (5.11" x 5.11")
Size: 149mm x 149mm (6" x 6")
You will need fabric, water soluble mesh and embroidery threads. 40-weight embroidery polyester threads are preferred for the project.
Cotton thread is not suitable because the embroidery will be too bulky.
Rayon thread is sensitive to the chemicals in the water-soluble mesh and will not work for the project.
Please note: ALWAYS make a test stitch-out on scrap before you make a stitch-out on the real item.
Both designs are embroidered in the same way.
Step One: To embroider the design, hoop the fabric with a layer of water soluble mesh. Start embroidering. The machine will embroider the outline of the design and stop.
Step Two: Take the hoop from the machine. With a pair of sharp scissors cut away the fabric inside the outline.
Step Three: Return the hoop to the machine and finish embroidering.
Step Four: Wash away the stabilizer and leave to air dry. Press with steam
We used the designs from the set for these two doilies.