Available in 3 sizes: for large 130 x 180 mm (5" x 7"), mega and commercial hoops.
Size: 115mm x 179mm (4.42" x 6.88")
Mega Hoop in HUS and VIP:
Size: 149mm x 233mm (5.73" x 8.96")
Mega Hoop in DST, PES, VP3 and EXP:
Size: 159mm x 248mm (6.12" x 9.54")
Design for mega hoop is not available in JEF and XXX formats!
Size: 175mm x 272mm (6.73" x 10.46")
Design for commercial hoop is available only in PES, EXP, DST and VP3 formats!
This machine embroidery design is part of our Floral Roses collection. It uses the Photo Stitch technique. It is available for the Commercial hoop (8" x 12"), Large hoop (5" x 7") and Mega hoop (6" x 10").
This is a stitch-out of the design. We turned the stitch-outs of the design into magnet pins on a fridge.
For this project we used a magnet sheet with adhesive side. We prepared the stitch-outs on a layer of organza with 2 layers of water soluble mesh. After the mesh was dissolved, we cut out the design and pressed it. Then we traced its outline on the protective paper of the magnet sheet. Then we cut out the magnet along the outline, removed the paper and stick the stitch-out onto the magnet.
If you do not have a magnet sheet, you can use many small magnets. Glue them on the back of your stitch-out as shown.