Hardanger Table FSL Set

The designs from our Hardanger Embelishment Set can be embroidered as regular FSL. You can read about this in our General Guidelines.

To embroider this set we used 60-weight 100% cotton embroidery threads; both emroidery rayon and polyester also give good results.

Some points to remember from the General Guidelines:
Use Vilene water soluble stabilizer;
Use the same thread for the upper and bobbin thread to get two-sided embroidery.
DO NOT embroider several designs in one hoop.

The FSL designs can be then stitched onto fabric.

Another method of combining the designs from this Hardanger set with fabric is described in the Hardanger FSL Set Guide.

This set consists of four designs which can be embroidered in one or two colors.

The designs are great for table linen. The rounded shapes can be stitched together to form a lacy doily:

This same doily can be used as a lacy insert on a table topper. We used a piece of white linen, measuring about 25" x 25".

We simply machine-stitched the doily onto the fabric.

The edges are finished with the edge and corner designs from the same set. We embroidered the edge design 12 times (3 for each side) and the corner design 4 times.

To make this adorable little doily, we embroidered the corner design four times and machine-stitched them onto a square of fabric.

We hope that you liked our ideas and will come up with many of your own!

If you liked this hardanger set, you might also like:

	Hardanger FSL Set
	Hardanger Ornament FSL Set
	Christmas Hardanger FSL Set

Back to Hardanger Embelishment Set