Available in 3 sizes: for large 130 x 180 mm (5" x 7"), mega and commercial hoops.
Size: 126mm x 179mm (5.04" x 7.16")
The design for large hoop is divided into 2 parts by colors, but does not require re-hooping!
Mega Hoop in HUS and VP3:
Size: 149mm x 212mm (5.96" x 8.48")
Mega Hoop in DST, PES and EXP:
Size: 159mm x 226mm (6.36" x 9.04")
Design for mega hoop is not available in ART, JEF, JEF+ and XXX formats!
Size: 182mm x 258mm (7.28" x 10.32")
Design for commercial hoop is available only in PES, EXP, DST and VP3 formats!
This machine embroidery design is part of our Floral Flowers collection. It uses the Photo Stitch technique. It is available for the Commercial hoop (8" x 12"), Large hoop (5" x 7") and Mega hoop (6" x 10").
We used this stitch-out to decorate a lid of the wooden box. We embroidered the design on a layer of organza with 2 layers of watersoluble mesh. After the mesh was dissolved, we cut out the design, pressed it and glued onto the wood.
This is a close-up of the embroidery.
Another stitch-out we turned into a magnet pin on a fridge. For this project we used a magnet sheet with adhesive side. We prepared the stitch-out in the same way as described above. When the stitch-out was ready, we traced its outline on the the protective paper of the magnet sheet. Then we cut out along the outline, removed the paper and strick the stitch-out onto the magnet.
You can read about how to make this quilt on the project page.
Anthurium (Flamingo Flower)