Each part of the doily is divided into 2 parts by colors and does not require re-hooping!
This set of machine embroidery designs is part of our Freestanding Lace Bowls collection. It uses the Freestanding Lace technique. The designs will fit the Large hoop (5" x 7").
To make the bowl, you'll have to embroider six panels and the hexagon for the bottom. Use 2 layers of Vilene-type water-soluble stabilizer and use the same thread for both the needle and bobbin to get 2-sided embroidery. Rinse the stabilizer and leave to air dry.
Press all parts with steam. Continue as you would with any other freestanding bowl. Read instructions in our Guide to Assembling a Freestanding Bowl.
A close-up of one of the panels.
To make the doily, you'll have to embroider four doily panels and stitch them together.
Use 2 layers of Vilene-type water-soluble stabilizer. For the doily, you can use white bobbin thread as it doesn't have to be two-sided.
Rinse the stabilizer and leave to air dry. Press with steam and stitch the parts together using invisible thread.
|Category:||Freestanding Lace >> Bowls|
|Price:||$15 to $20|