Menu
Size: 101mm x 143mm (4.04" x 5.72")
Stitches: 42356
Colors: 10
Size: 91mm x 139mm (3.64" x 5.56")
Stitches: 25553
Colors: 10
Size: 147mm x 129mm (5.88" x 5.16")
Stitches: 37009
Colors: 10
Size: 129mm x 129mm (5.16" x 5.16")
Stitches: 36103
Colors: 13
Size: 82mm x 82mm (3.28" x 3.28")
Stitches: 12351
Colors: 1
Size: 82mm x 82mm (3.28" x 3.28")
Stitches: 10741
Colors: 4
This set of machine embroidery designs is part of our Freestanding Lace Bowls collection. It uses the Freestanding Lace technique. The designs will fit the Large hoop (5" x 7").
To make the bowl, you'll have to embroider six panels and the hexagon for the bottom. The bowl panel is in the upper left corner; the bowl center is under the panel. Use 2 layers of Vilene-type water-soluble stabilizer and use the same thread for both the needle and bobbin to get 2-sided embroidery. Rinse the stabilizer and leave to air dry.
Press all parts with steam. Continue as you would with any other freestanding bowl. Read instructions in our Guide to Assembling a Freestanding Bowl.
A close-up of one of the panels.
You can decorate the bowl with satin or silk ribbons.
To make the doily, you'll have to embroider eight doily panels and a circle as the center. The doily panel is in the upper right conner, and the doily center is in the third row. You can stitch either a plain circle or the ABC circle.
Use 2 layers of Vilene-type water-soluble stabilizer. For the doily, you can use white bobbin thread as it doesn't have to be two-sided.
Rinse the stabilizer and leave to air dry. Press with steam and stitch the parts together using invisible thread.
The part in the second row on the right can be used as a small doily or as a coaster.
| Category: | Freestanding Lace >> Bowls |
| Theme: | Fruits |
| Technique: | Freestanding Lace |
| Hoop Size: | Large |
| Price: | $15 to $20 |
Shopping Cart
Check Out
